What is the most durable spray bedliner?
That is relative to applicator and prep…. But, for the sake of argument, a polyurea-hybrid or poly-hybrid in general exhibit better specs for adhesion, tear and impact resistance than polyurethane or aliphatic urethanes.
Applicator experience and prep is a huge factor in regards to longevity and perceived durability. Meaning, that if the applicator is experienced enough, he can make a coating with lower specs than another last longer and in general than a better spec material applied by someone without the proper experience.
Take this into consideration when having a bed liner applied by a shop. If you are seasoned or have the support of the coatings manufacturer you may be able to produce the same if not better results than a professional company. Spray-Lining has the best support hands down for DIY systems. So, along with reasonable material prices, you get the information and support you need to finish your job with superior results. Shop Professional DIY Products.
Floor Coatings for Garages and Workshops | Marine Coatings | Shop OUR Colored Bed Liners
Hello,
I am a professional house painter and I am wondering if I could use my airless sprayer to apply the spray on bed liner. Why could I not premix the texture and epoxy and use a large orifice Elastomeric tip such as .025 or larger, set pressure to the required psi and let her rip?
Yes… what you describe can be done. Please get in touch with us directly at 855-545-4900 so we can discuss it with you
I want to spray the floor in my 1994 Ford 150 truck in place of the old carpet. Take the carpet out
Spray Lining and Coatings has a wide variety of products to suit your needs. You can always call us directy at 855-545-4900 to chat. We will be happy to recommend the best spray coating for your project.
I want to cover the roof of my rv, 310 sq ft it is plywood and sheetmetal. Will your product work and how much would I need.
Spray Lining and Coatings manufactures materials which would be great for your use. See our short article on coating plywood at: https://best-deal-on-spray-in-truck-bed-liner.com/stick-plywood-concrete/ .
Always feel free to call us at 855-545-4900 to see what specific product is best for your project.
I work for Rhino Linings of Kitchener-Waterloo in Kitchener, Ontario. My biggest complaint about North Ontario Coatings is that they must get cheap stuff from their vendor, supposedly Spray-Lining & Coatings. But we are a Rhino Dealer and that SLC polyurea can’t be as great as Rhino’s because Rhino is the pioneer.
I am sending this testimonial as a way of saying thank you for producing a cost effective liner for the do it yourself crowd. I recently put Spray-Lining & Coating in my 2005 Dodge truck bed and was very pleased with the results. After looking the product over for a few weeks, it occurred to me that there would be other uses as well. I have a 2002 Harley Davidson Electra Glide motorcycle that through several 8,000 miles trips, has suffered many rock chips to the front end. The cost of painting is high and there is always the worry of repeating the damage. I decided to try your product on my motorcycle and coat some of the parts that are prone to road debris. The bugs are hiding the rock chips. I am very happy with the results and he unique look. I have plans to use the product as a trim accent to other parts of the bike soon. Thanks again!
my husband & I have a Koi pond coated with Pond Armor. The North Ontario Coatings dealer took that junk off & put stuff they taught us is better. Its called Polyurea for waterscapes … Company called SLC make it. Its holding up well.
Hi, Can I use your product to use on a fishing boat deck without sandblasting , the deck have a bit of old paint and surface rust ?
If using Spray-Lining Coatings, SLC-Marine-114, if it’s clean aluminum, blasting is unnecessary. No old paint is renewed to adhere by any polyurea, by Spray-Lining Coatings or any legitimate vendor.
I like the poly fleck look of the garage coating, but need the disability of the koi pond coating, I am wanting to make one whole room in my house a shower, I will put up concrete tile backer board first, then I’m assuming some kind of sealant, then on to ???
I was wondering if anyone had done of if it’s possible to do a whole house in a light gray
I had a professional company spray the back bed of my 2016 truck and they only sprayed it about 1/32 of a inche thick and I was wanting to know if that was the correct thickness?
I had a professional company spray the back bed of my 2016 truck and they only sprayed it about 1/32 of a inche thick and I was wanting to know if that was the correct thickness?
Windle, 1/32 inch is half the minimum thickness or height of any polyurea for any high impact surface. That’s only our experience but opinions vary depending on whose lying, misrepresenting or true facts you hear. Those phony or cheap applicators are to blame, not necessarily the brand name as most consumers believe. This includes Spray-Lining & Coatings dealers too. Odds are better with SLC only because they get polyurea for much less $ than all brands. The two popular brands, Line-X & Rhino Linings are both polyurea. While there are differences, neither are low quality. Any true polyurea applied by a good applicator will be thicker, prepped better, etc. For this reason only in 1989 SLC, just Spray-Lining & Coatings was chosen so as to allow the “brand” or reputation to be 100% accountable to SLC applicators who are certified by us.
Wpsladmin, Scorpion is the name of the product that was sprayed into the bed of my truck. I am trying to get the company to respray it to get it to the thickness that I have seen several other trucks with factory and after factory sprayed in bed liners which was close to 3/32nd to 1/8th of a inche thick. Thank you for you response.
Scorpion Coatings is a very soft but high priced material to apply, maybe most expensive anywhere. To be slip-proof, also protect, i.e. be strong a rubbery coating like that MUST be thicker than more standard polyurea as Line-X Standard or Rhino HardLine. Look at it this way: Another 75 sq ft at 1/32 inch = 1.5 gallons. Paying whomever to apply another 1.5 gallons within under 75 sq ft of truck bed might cost $100 to $200 more, true. Unfair as that may be its a low price when you consider how much more protection that is over, say 15 + years. Scorpion is not very strong but at 1/8 inch height it’d be stronger than most anything at 1/16. Get it? … Now because this SLC Review helps Spray-Lining & Coatings sell more polyurea I must repeat: That’s why the DIY & professional grade polyurea of Spray-Lining & Coatings has control over its flexibility!
We replaced the floor of my friends boat with wood and sealed it with Thompson water seal. Is there a primer we can use to have it spray lined?
Thompson Water Seal is a 1 part acrylic. Its not marine grade but might help clog some pores in wood. That was unnecessary if you’re applying “real” polyurea and not some simple, 1-part material (many DIY bedliner deals are 1 part paints and not true polyurea at all). A 1 to 1 epoxy primer by DuPont or PPG or any quality name as such will work. A marine-grade 1 to 1 = best.
Once primer is dry immediate lining with actual polyurea is best, or ASAP. Thicker = better quality, 63 to 125 mil is advised to really last.
hi, im interested in using your product to spray my entire truck. the only thing thats holding me up is your cfm requirement. im currently shopping for an air compressor and at the settings you guys require i would need 500$ plus dollar air compressor to even come close. thats why im leaning toward liner extreeme. do you have any other options. the compressors im looking at are in the 200$ range and are around 3.4cfm at 40-60 psi. ive always read tons of reviews from guys who have sprayed many bedliners and claim only the psi really matters, not so much the cfm. please elaborate. thanks.
The actual CFM is less important than PSI. You’ll be fine with smaller compressor but it’ll just run harder, that’s all. As for Liner Xtreeme or any other DIY vs SLC you’ll find only 4 vendors with actual polyurea-type hybrids under small DIY qtys: Spray-Lining & Coatings, Scorpion/ Als Liners, Speedliner & Super Liner. All others sell 1 or 2 stages urethanes or epoxies which are much lower in quality than any polyurea hybrid lining. Then, If you look closely at http://www.spray-lining.com/diy/compare-diy-bedliners.php and at
https://drive.google.com/file/d/0B81ZhL42Eo8Wdm8tM1BhNm1BXzA/view and here http://spray-lining.net/wp-content/uploads/Spray-Lining-Franchise-Review-Guide.pdf you’ll really prove that SLC = lowest pricing with fairest deals.
Can Raptor Liner be sprayed onto fresh acrylic urethane paint like Spray-Lining & Coatings does? During the window period to acquire a chemical bond, or does it need to fully cure and be scratched for a mechanical bond?
Good Question. Any urethane coating as raptor requires full cure & scuffing for re-coating; before 60 days is necessary also. Old urethane won’t adhere well. SLC polyurea is re-coat-able indefinitely, FYI. Spray-Lining & Coatings doesn’t sell raptor but search THIS: Compare the Top 18 DIY Spray on Truck Bedliner Kits of 2018 … FACTS ARE A BEAUTIFUL THING.
I?m interested in doing a spray on lining for the interior decking of a 20 year old 20? bow rider boat. I ripped out the carpet and have repaired the cracked fiberglass. Do I need to sand or otherwise prepare the surface, can spray directly overtop?
Will the spray on surface be slip resistant and comfortable for bare feet.
How many coats have to be applied?
How long to dry between coats?
Mike,
Thank you for your interest in Spray Lining and Coatings products.
Please see the all caps answers to your questions below:
I?m interested in doing a spray on lining for the interior decking of a 20 year old 20? bow rider boat. I ripped out the carpet and have repaired the cracked fiberglass. Do I need to sand or otherwise prepare the surface, can spray directly overtop? SCUFFING ON FIBERGLASS IS UNNECESSARY BUT ALWAYS BEST ON ANY SURFACE…
Will the spray on surface be slip resistant and comfortable for bare feet. YES- MARING-GRADE DECK SPRAY-LINING (type) AND COATING IS SLIP-PROOF ?AND? ANTI-STICK – REMAINS SANITARY.
How many coats have to be applied? ONE THICK LAYER ON HORIZONTALS, 2-3 LAYERS ON VERTICALS…
How long to dry between coats? 19 MINUTES @ 70 DEGREES F TO SET OR DRY-TO-TOUCH …
Feel free to contact SL&C for more questions directly at 1-855-545-4900
I am turning a boat trailer into a flat bed trailer. using wood. what do you have that I can coat the metal and wood part of the trailer with that will protect it all.
Matt,
Spray Lining and Coatings has a complete line of coatings which would be perfect for your needs. Depending on your specific requirements, we can provide a customized coating for both the metal and the wood areas of your trailer.
Please feel free to contact us at 855-545-4900 for more information.
Our building has a plaza that also serves as roof for an underground garage. Defective workmanship has led to the cement to crack and allows water seepage into the garage.We were advised that shaving 2-3′ off the cement and applying a rubberized lining would solve the problem. Does the lining hold and make the surface impermeable to rain/snow melt?
Hi Alex,
Yes… All our coatings adhere well to concrete, and are impermeable to water. They vary in application method, color availability, tensile strength, elongation, etc. depending on the specific needs, so you would be well advised to contact us directly for more information at 855-545-4900 extension 902, or by email at operations@spray-lining.com.
Thank you for getting in touch with Diamondback Linings about our SL&C brand products!
Hi we have a 100 year old church that has been converted to a hostel, we have recently re shingled the tower, installing new windows, we get gales that sweep through and we were wondering if your linex would be suitable to spray onto the shingles to make the surface waterproof and what the cost per square foot would be.
Hi Peter,
Our Rhino/Line-X Alternative coatings could be applied to most surfaces, but we may also have other coatings which would serve your purposes better. We encourage you to view some of the DIY products available through our DIY Spray On Coatings Storefront, and to get in touch directly at 855-545-4900 ext 902 for more specific recommendations.
Thank you for getting in touch with Spray Lining and Coatings!