What is the right CFM and PSI for my DIY Bed Liner?
Different Products require different settings. Spray-Lining SLPVH-100, which is the basic spray bed liner, requires between 9 cfm @ 80 to 11 cfm @ 120 psi. You can spray it with lower pressure settings if thinned more. Lower quality products require less CFM @ PSI because they are inherently thinner which means less of “bed liner texture” and more of a paint-type finish.
We have the most versatile spray bed liner that allows you to achieve a broad range of textures and finishes for your project needs.
View DIY Products
All DIY Spray Bedliner Compressor Settings
-
Scorpion X02 Compressor Settings
Air Requirements: 7 cfm @ 40 psi
Operating Range: 15-40 psi
Air Supply Connection: 3/8? -
Al?s Liner Compressor Settings
You need a minimum of 7 cfm capacity and 25 psi at the gun.
You do not want to exceed 55 psi at the gun.
This will generate too much over spray
You can achieve virtually any texture from 25 to 55 psi. -
Raptor
6 CFM @ 65 psi
4.5 SCFM @ 90 PSI, 5.5 SCFM @ 40 PSI -
Durabak
9 CFM @ 50 PSI
Schutz gun with 60 PSI -
LinerXtreeme
60-75 psi – No CFM Requirement to be found
-
Speedliner 1000
11 CFM @ 90 PSI